How to find an electrician and an equipment installer in Georgia
In brief
To find an electrician or installer in Georgia, first name the system and the result you need. Wiring and lighting go to an electrician, air conditioner and ventilation installation is discussed with specialist technicians, and cameras and alarms with a security system installer. If a single appliance has stopped working, you need a specialist in repairing it. Before the visit, agree on the inspection, the scope of work and how the result will be checked.
Information checked on 31.10.2026.
Where to look for an electrician and installer by city
Choose the category for your city, open the descriptions of suitable providers and send them the same task. First clarify whether the technician works with your system and can come to the address you need. A listing in the directory does not in itself confirm qualifications or availability.
| City | Categories for your task |
|---|---|
| Batumi | Electrician; Air conditioner technician; Alarm and camera installer |
| Kutaisi | Electrician |
| Tbilisi | Electrician; Air conditioner technician; Ventilation technician; Alarm and camera installer |
If there is no suitable profile in your city's row, ask the chosen provider whether they can travel to you. The service, the address of the visit and possible costs are agreed before the visit.
Which specialist to choose for your task
| Task | Profile | What to tell them | What to agree on |
|---|---|---|---|
| Wiring, sockets or lighting | An electrician with experience in the relevant work | What needs to be installed or changed, where the point is located, whether there is a design plan | The scope of checking and changing the line, and how the result will be confirmed |
| Air conditioner installation | Air conditioner technician | The model, the number of units, the intended location and access conditions | What the installation and trial start-up include for your specific model |
| Installing or changing ventilation | Ventilation technician | The purpose of the room, the existing system and the problem as described by the owner | What will be surveyed before a solution is chosen and how the result will be shown |
| Cameras or alarm | Alarm and camera installer | Areas to be monitored, the number of devices, the network, power supply and the access methods needed | Device locations, recording, access rights and the handover of control |
| Fault in a single appliance | A technician who repairs this type of appliance | Brand, model, how the fault shows itself and any earlier service calls | The scope of diagnostics and the repair decision before parts are bought |
The list of tasks helps you choose a profile but does not establish the cause of a breakdown. If the lights go out when an appliance is switched on, describe exactly that observation. The decision to check the line, the appliance itself or both is made by the specialist after an inspection.
What to describe and photograph before the visit
Write the city and district, the type of premises and the result you want. For installation, it helps to give the equipment model, a photo of the intended location and the visible route to it. For a fault, say when it occurs and what happens during normal use. Instead of "do it properly", state what you want to get: move a light fitting, install the air conditioner model you have chosen, or set up camera viewing on the owner's phone.
Photograph only the parts that are accessible from outside. Do not open the panel, socket or appliance casing just to take a photo. Give the exact address and access details to the chosen technician in person; do not include passwords, security codes or photos of documents in a public listing.
How to compare providers before ordering
Ask about similar work with your type of system: what they installed, in what kind of premises and who was responsible for commissioning. A photo of a finished room is useful if it lets you understand what work was done. A general album of interiors does not explain who ran the cable, configured the cameras or connected the equipment.
Clarify who exactly will come, who will do the electrical part and who is responsible for configuration. Ask them to name the training and documents relevant to this work and this equipment model. If the provider refers to a mandatory permit, ask them to state its basis and scope. Agreeing to do everything in one visit does not replace such a conversation.
Compare reviews with your own task. A story about replacing a lamp says little about installing ventilation, and the successful installation of a single camera does not describe how a system with remote access works. Before paying an advance, keep the provider's name, the list of work, the way to contact them and the agreed terms for cancelling a visit.
What to include in an installation estimate
Clarify what is paid separately from the installation itself. A preliminary estimate from a photo and the final figure after an inspection may differ: agree in advance when the amount becomes settled and how the technician reports additional work. Write the purchase of equipment, consumables and delivery as separate lines.
| Work | Unit and quantity | Materials | Additional terms |
|---|---|---|---|
| Visit and inspection | The agreed number of visits and the task of each | The need for consumables to be clarified | The cost of the visit if you decline the installation |
| Selection and purchase | Models and quantities according to the specification | Equipment, cable or route, fasteners | Who buys and how substitution of an item is agreed |
| Installation | The number of points and operations after the inspection | The actual length of routes and cables according to the agreed calculation | Preparing openings and restoring the finish |
| Access to the site | Work locations and access conditions | The access equipment needed is determined by the provider | Facade, height, restrictions of the premises and arrangement of access |
| Configuration | Devices, modes and user rights | Storage and other items for the chosen system | Subscriptions and functions to be shown at handover |
| Additional work | The new scope is recorded separately before it starts | A change to the list is agreed with the customer | The reason for the change and confirmation of the amount |
| Handover of the result | Agreed checks, instructions and cleaning up | Documents and a list of the devices handed over | Contact and terms for a repeat visit |
What to ask about your specific system
Electrical wiring and lighting
Explain whether you need a new point, the relocation of an existing one, or finding the cause of a fault. Ask the technician to describe in advance which checks they will carry out, how they will confirm the result and what they will hand over to you after the work. If the design has to be changed or the work agreed with the owner of the premises, settle this before installation begins.
Air conditioner
Discuss the placement of the units, the route of the line, condensate drainage and the possibility of later servicing. Ask about noise in normal operation and how the water drainage will be checked. Clarify which modes the technician will demonstrate at start-up and what instructions they will leave. Exact installation parameters are taken from the documentation for your model.
For example, the Daikin manual for CTXF20–35F5V1B separates the checks before start-up, the trial run and the handover of the system to the user; it also treats drainage separately. This is an example of documentation for a specific series, checked on 31.10.2026, and not a universal procedure for any air conditioner.
Service links on this topic are collected on the page on installing and repairing air conditioners in Georgia. When you get in touch, state right away whether you are ordering installation of a new unit, servicing, or fault finding.
Ventilation
Tell them how the room is used, where the accessible grilles are and what concerns you: odor, noise or a feeling of insufficient air exchange. Ask what the specialist will survey before choosing equipment and how they will show the result. Agree on the placement of elements, access for servicing and the conditions for checking during normal use of the room.
Cameras and alarm
First decide what result you need: seeing the entrance, receiving a notification or finding a saved recording fragment. Then discuss the placement of devices, power, network, storage location and user access. Separately clarify paid subscriptions, servicing and what will happen if the internet is lost or the power is cut: the answer depends on the chosen system.
For the common entrance and common areas of a residential building, Article 10(6) of the Law of Georgia on Personal Data Protection provides for the written consent of more than half of the owners and a separate exception for performing duties established by law. Filming the entrance to an individual unit is regulated by paragraph 7. For purely personal and household processing, Article 2(2)(a) sets an exception from the scope of the law. Before installation, find out whether the rules apply and agree the limits of the field of view. Source checked on 31.10.2026.
Discuss sound recording separately from video. Clarify whether a microphone is needed for your task and how it is switched off: the rules on audio monitoring are set out in Article 11 of the same law. Do not enable sound by default just because the camera has the function.
How to agree on the handover of camera access
Set up the main account so that control and access recovery remain with the owner of the system. Before the work ends, check which users have been added, what rights they have and how to remove the installer's temporary access. Discuss changing temporary passwords when control is handed over. Do not include a password in the handover record, open correspondence or a screenshot.
The method of handover depends on the manufacturer. The TP-Link help page on shared access for Tapo and Kasa describes inviting another account and the owner revoking access. For your model, the names of items and the set of permissions may differ; ask the installer to show them in the current app. Checked on 31.10.2026.
Example of a request for camera installation
When you receive a reply, check it against your task. If the technician proposes a different set of equipment, ask them to explain which result will change. Before paying, determine where the recording will be stored and how you yourself will open the fragment you need after the installer has left.
The path from the directory to an order
- Open your city's category in the table above and choose the profile you need.
- Compare the providers' descriptions, similar tasks and reviews. Clarify whether they can travel to you.
- In the listing, open "Description", then "Main" and the available way to get in touch. Confirm the list of services with the provider.
- Send the same request to the chosen technicians and agree the contents of the estimate before ordering.
- Record the list of work, materials, the method of checking and the terms for handing over the result.
For a short search across two cities there is a separate answer, "How to find an electrician in Tbilisi and Batumi?". For installing several systems, use the comparison of profiles and the acceptance conditions from this guide.

How to accept the result
Ask the specialist to demonstrate the agreed functions in the usual way. Switching a device on does not yet show that the whole request has been fulfilled. For cameras, searching recordings and managing access rights also matter; for other systems, determine in advance what exactly will be checked at handover.
- The agreed devices and materials match the order list.
- The specialist carried out and explained the necessary checks for their part of the work.
- The standard functions were shown to the customer and any comments were recorded.
- Instructions, a list of the work performed and a payment document were handed over.
- The owner manages the accounts; temporary access is agreed or revoked.
- The terms for a repeat visit, the contact for it and the agreed response time are clear.
- Packaging and waste have been removed within the agreed order, and access for servicing is preserved.
If a discrepancy turns up, describe it in terms of the result: "the recording for the required time does not open" or "access was not handed over to the owner". Agree how it will be fixed and keep the correspondence. If the issue concerns safety, do not continue checking on your own: pass it to a qualified specialist.
Frequently asked questions









0 comments
Log in to leave a comment