Bathroom and toilet overhaul: steps, tips for choosing masters

Major renovation in the bathroom and toilet is a responsible event that requires careful preparation and planning. Here are the main stages of renovation, as well as recommendations for choosing the masters.

What to consider in the preparatory phase before starting a major renovation

In order for a major renovation in the bathroom and toilet to go quickly and without additional unexpected costs, it is recommended to think about several important points in advance.

Deciding if a bathroom remodel is necessary

That's when the need for remodeling arises:

• If the bathroom is extremely small and you want to expand it by using the space of a toilet or corridor.
• If there are no more than three people living in your apartment. Designers do not recommend combining the bathroom and toilet if the number of occupants exceeds this number: in this case, you have to queue up in the morning to share.

If you're thinking about remodeling, it's worth making sure your project can be legalized. Here's what is strictly forbidden:

• Do not extend a bathroom or toilet into the living space or kitchen.
• Do not locate the entrance to the toilet from the living space or kitchen.
• Do not reduce or remove ventilation ducts, even if they occupy a significant amount of space. After all, these ducts are not part of your apartment and do not belong to you.

What you can do when remodeling:

• Enlarging the bathroom and/or toilet area at the expense of the corridor.
• Demolish the partition between the bathroom and toilet.
• Relocate plumbing fixtures, for example, move the bathtub from the left wall to the right wall.
• All changes must be reflected on the plan of the apartment and get approval from the BTI. Otherwise, you may face a fine of 64-79 Georgian Lari and you will have to return the layout to its original form.

How do I obtain approval of redevelopment? You will need to prepare an application, apartment documents, a redevelopment project and a technical passport. The technical passport can be obtained from the local department of the BTI. In addition, it is necessary to order the services of specialists to draw up a new plan of the premises. It is important to make sure that the performer has the appropriate license for such work. The cost of this service is approximately 315-475 Georgian GEL, and it includes only drawing up a plan and its coordination, not including the development of a design project.

On Uslugi.ge you can find professionals who provide services for developing a new floor plan. Contact them to get licensed assistance.

Bathroom remodeling can bring not only the satisfaction of your desires, but also a significant improvement in the functionality of your home. You don't have to limit yourself to just increasing the size of the bathroom or toilet, you can think about creating a stylish and comfortable space that reflects your personality.

One of the interesting ideas is to add a whirlpool bathtub. Such an element will allow you to relax after a hard day and create a true spa-like atmosphere right in your home. You can also consider installing an elegant shower enclosure with a chromotherapy function, which will help you energize and add extra charm to your bathroom.

Lighting is an important aspect of any room, including the bathroom. You can experiment with different light sources to create a pleasant and relaxing atmosphere. Adding backlighting in niches or installing LED strips around your mirror will help create dramatic lighting and give your bathroom a modern look.

Don't forget about storage. Built-in cabinets, shelves or drawers can help you organize your bathroom space and keep all the items you need close at hand. You can choose a design that suits your style and preferences.

Creating a pleasant atmosphere in the bathroom also depends on the choice of finishing materials. Tile, marble or wood are popular options. They add uniqueness and style to your bathroom, creating harmony with other interior elements.

Definition of a financial plan

When carrying out a major turnkey renovation and finishing of the bathroom and toilet, the cost turns out to be quite significant. Not only does it require replacing finishes and plumbing fixtures, but often also redesigning utilities.

However, there are a few tricks to save money. For example, you can buy ceramic tiles instead of porcelain tiles and apply them only in the wet area, without covering the entire surface of the walls and floor. It is also possible not to change the sanitary ware completely, but simply refresh its appearance with acrylic coatings.

Choice of cooperation: brigade or individual craftsmen for each type of work

When choosing to collaborate on various types of work in your bathroom and toilet, it becomes necessary to carefully consider two alternatives: working with a crew or hiring separate craftsmen for each type of work. Each approach has its own benefits and risks that are worth considering when making your decision.

Working with a crew is a more convenient and organized form of cooperation. You set the task to the craftsmen, and they immediately make an estimate, allowing you to know in advance the exact cost of the work. The team usually includes a foreman, who controls the stages of work and compliance with deadlines. In addition, the foreman can handle the procurement of necessary materials and solve problems if something goes wrong. This reduces your workload and ensures that the project moves forward more smoothly and efficiently.

However, another option is to hire separate foremen for dismantling, roughing in and finishing work. This approach also has its advantages. For instance, it allows you to choose professionals who have experience and art in a particular field, which can improve the quality of work. In addition, you can manage the process more flexibly and distribute tasks between craftsmen according to their expertise. However, it is worth remembering that this approach also comes with certain risks. For example, dismantling craftsmen may delay the work, which can delay the work of other specialists and shift the project schedule.

Speaking of cost, on average, creating a turnkey bathroom and toilet using a crew will cost about the same as hiring individual craftsmen. However, cooperation with a brigade can bring you certain advantages in the form of a discount for a large volume of work. Some professionals provide a discount of up to 15% for complex tasks. This can prove to be an additional incentive for choosing to work with a crew.

It is important to consider that when choosing between working with a crew or individual craftsmen for each type of work in your bathroom and toilet, you need to take into account the individual characteristics of the project, your preferences and capabilities. The decision should be made based on the analysis of all factors such as the complexity of the work, the availability of qualified professionals and your personal preference in the organization of the work process.

Remember that the ultimate goal is to create a quality and comfortable space that will meet your needs and expectations.

Choose the right design project for your interior design needs

Before embarking on a major renovation, it is essential to have a suitable design project in hand. Experienced builders will not start work if they do not have a clear plan of action. There are two options: hire a professional designer or create the project yourself.

If you decide to hire a designer, it is worth considering that the price of his services will depend on the experience and qualifications of the specialist. On average, a design project can cost 79-120 GEL per square meter. However, in addition to the financial costs, it is also important to consider the timing of the work and the level of understanding with the designer.

If you prefer to take on the creation of a design project yourself, special programs such as Remplanner can help you. These programs offer a wide range of features, and some of them are available for free. However, to make full use of all the features of the program, you will have to purchase paid access. The cost of monthly access is about 32 Georgian GEL.

Now let's move on to the most important thing - choosing the right design project for your interior. What style is closer to you: classic, modern, minimalist or maybe eclectic? Each style has its own characteristics and brings its own atmosphere to the room.

If you prefer elegance and luxury, classic style may be the perfect choice for you. It is characterized by exquisite furniture, curved lines and details in the form of carvings and gilding. The color palette of classic style usually includes neutral shades such as beige, brown and white.

Modern style differs from the classic style in its simplicity and functionality. The main thing here is a minimum of decorative elements, clear lines and geometric shapes. The color palette in the modern style can be both neutral and bright and contrasting.

Minimalism is a style that strives for simplicity and liberation from unnecessary details. In the interior you will find clean lines, simple shapes and functional pieces of furniture. The main color scheme of minimalism is white, black and gray, although you can add bright accents to give a special mood.

If you don't want to be limited to one style and prefer a mix of different elements, eclectic style is your choice. Here you can combine different eras, styles and color schemes. Eclecticism gives you the opportunity to show your individuality and create a unique interior.

Choosing the right design project for your interior depends on your preferences, lifestyle and features of the room. When creating a project do not forget to take into account the functionality, comfort and harmony of space. Regardless of the style you choose, it is important to remember that the design should reflect your personality and create an atmosphere in which you will feel comfortable.

Do not be afraid to experiment and be creative when choosing a design project. After all, your interior is your reflection, and it is important to you that every detail corresponds to your ideas of comfort and beauty. Choose the perfect design project and create the interior of your dreams!

Choose the right style for your interior

When choosing the right style for your bathroom interior, current trends lean towards minimalism, which will help visually expand the space. However, when creating a unique design, you can take advantage of various sources of inspiration that offer interesting solutions. For example, Pinterest, Instagram design blogs and even search for images in Yandex or Google on the query "stylish bathroom renovation".

Creating harmonious color combinations is also an important aspect of bathroom design. For this purpose, you can use the Adobe Color website. Here you can choose your own combinations or be inspired by the "Trends" section, where current color solutions are presented.

However, the choice of style for the bathroom is not limited to minimalism. There are many other options that can give your interior individuality and aesthetic charm.

For example, retro style is a great choice for creating a cozy atmosphere in the bathroom. You can use bright colors, vintage accessories and classic details to recreate images of past eras. This style is suitable for those who appreciate the unique charm of old times.

Another interesting option is eclecticism. This style offers a combination of different elements and trends in one interior. You can safely mix different colors, textures and shapes, creating a unique atmosphere. Eclectic bathroom will be an expression of your individual taste and creative approach to design.

Purchase the necessary building materials

When it comes time to start renovation or construction, one of the key issues is the purchase of building materials. Choosing the right materials plays an important role in ensuring a quality and long-lasting result. In this text, we will look at several approaches to purchasing materials and share helpful tips to ensure that the process is efficient.

When starting to purchase building materials, you can choose between two basic options: do everything yourself or entrust this task to specialists. Let's take a closer look at each of these options.

Procurement in-house:

If you decide to handle the purchase of materials yourself, you need to make a list of materials and estimate their cost. It should be remembered that the price does not always reflect the quality. Therefore, it is recommended to research the market and pay attention to reviews of manufacturers and suppliers.

One of the important aspects of self-purchasing is the transportation of materials. If you will not be at home during delivery, it is necessary to provide for the question of who will lift the materials into the apartment. Keep in mind that some workers may refuse to perform this task. Therefore, discuss this issue with the workers in advance and take it into account when planning the process.

Procurement through specialists:

Entrusting the purchase of materials to professional craftsmen is also a common option. Often construction teams have good relationships with specialized stores, which allows them to get good discounts. However, you need to be vigilant and follow the purchasing process.

When purchasing through a handyman, it is advisable to ask for receipts from each purchase. If you feel that the prices are too high, you can always check the current prices of the materials on the official websites of the suppliers or go to the store in person. This will help you make sure that you are paying a fair price for the materials you choose.

Regardless of the procurement method you choose, there are a few additional tips to help you ensure a smooth and efficient process:

Prepare a place to store building materials in advance. It is ideal if it is a dry and well ventilated room. This way, you will prevent possible damage to the materials due to moisture or other factors.

Don't forget about safety. When working with construction materials, use the appropriate safety equipment to avoid possible injuries.

Consult with professionals. If you are unsure about the right materials or doubt your skills, do not hesitate to ask experienced builders or consultants for help.

Step #1. Disassembly

At this stage, workers remove all the elements that need to be replaced, from wall tiles to the bathtub.

Estimating the cost of the work. Floor coverings and finishing materials for walls are calculated in square meters, and plumbing - piece by piece. Here are the approximate rates for dismantling:

• Old tiles - from 3 Georgian GEL per square meter;
• Linoleum - from 2 Georgian Lari per square meter;
• Washbasin - from 10 Georgian Lari per piece;
• WC - from 16 Georgian Lari per unit;
• Bathtub - from 32 Georgian GEL per piece.

Step #2. Preliminary stages of work

Once the old flooring has been removed from the floor, walls and ceiling, it will be necessary to lay conduits for electrical wiring, install hot and cold water pipes, and waterproofing.

Wiring

When considering wiring, it is important to consider several factors: frequency of replacement, cost of work and consumables. Let's break down each of these in more detail.

Frequency of wiring replacement:

Residential wiring is typically replaced every 25 years. This is to ensure the safety and reliability of the electrical system in the home. However, it is worth noting that it is often recommended to replace even "younger" wiring when doing a major renovation of a bathroom and toilet. This is especially true if it is planned to add new electrical points or change the electrical wiring in the room. This approach allows you to ensure that the wiring meets modern safety standards.

Cost of works:

The cost of carrying out wiring replacement work can vary depending on many factors. On average, the price is around GEL 30 per square meter of the room. However, it should be remembered that the specific cost may vary depending on the region, the complexity of the work, the availability of power tools and materials, and the skill level of the electrician performing the work.

Cost of Consumables:

One of the important aspects when replacing wiring is the cost of the consumables needed. For example, the electrical cable used for the work is usually sold in sets of 5 meters. The cost of such a set is approximately 160 Georgian GEL. When planning wiring replacement, it is necessary to take into account the specific requirements of the design project and the number of electrical points to determine the necessary length of cable.

It is important to note that wiring replacement is a complex and responsible task that should be entrusted to professional electricians. Improper installation of wiring can lead to accidents, damage to electrical equipment and even endanger people's lives. Therefore, it is recommended to contact qualified professionals who have experience and knowledge in the field of electrics.

Today, there are also innovative technologies related to wiring that are worth mentioning. For example, some homes utilize "smart wiring" that allows you to control lights and appliances using a mobile app or voice commands. This creates convenience and improves the energy efficiency of the living space.

In addition, modern wiring materials have improved characteristics such as flexibility, resistance to overheating and fire. This contributes to the longevity and safety of the electrical system in the home.

Pipes

When pipe replacement is necessary. Pipe replacement is usually required when old pipes are frequently clogged or if you plan to relocate plumbing fixtures, such as moving a bathtub to another wall.

Cost to perform the work. Installing a piping system with three connection points (bathtub, sink, toilet) will cost you from 79 GEL. Replacing hot or cold water pipes will cost from 63 Georgian GEL.

Cost of materials required. The cost of polypropylene or metal plastic pipes starts from 285 Georgian GEL. This price includes a complete set of pipes for the arrangement of the bath and toilet.

It is important to note that the quality of materials plays a significant role in the efficiency of the piping system. Pipes made of polypropylene are characterized by high strength and resistance to corrosion, as well as have a long service life. Metal-plastic pipes, in turn, combine the strength of metal and lightness of plastic, providing reliability and ease of installation.

In addition to material selection, it is important to consider other factors when repairing or replacing your plumbing system. Planning and correctly calculating the required pipes and connectors are key aspects to achieving optimal system performance. Water pressure and flow parameters must be considered, and quality and reliable faucets and fittings must be installed.

When designing and repairing the plumbing system, it is also worth paying attention to the possibility of installing modern technologies that help to save water and increase the comfort of use. For example, there are special pressure regulation systems, filters for water purification, as well as faucets with thermoregulation, allowing you to maintain a constant temperature of water in the bath or shower.

Don't forget the importance of professional installation and maintenance of the piping system. Contact experienced professionals who will be able to carry out all necessary work in compliance with all requirements and safety standards.

Leveling walls and ceilings

One of the key stages of repair work in the room is the leveling of walls and ceiling. This process allows you to create an even and aesthetically pleasing surface before applying decorative finishing materials. Depending on the condition of the walls and ceiling, as well as the preferences of the customer, different methods of leveling are chosen, providing the best result.

One of the common methods of wall and ceiling leveling is the use of plasterboard. If the wall and ceiling surfaces are fairly level and only require minor corrections, plastering may be a sufficient option. However, if the walls have curvature, cracks or gaps, drywall is the preferred material for leveling. Drywall sheets can be easily installed over uneven surfaces, providing a smooth and level base for subsequent finishing work.

Another option for leveling the ceiling is the use of stretch ceilings. This technology is becoming increasingly popular due to its advantages. Stretch ceilings are a film that is installed under tension, creating a perfectly flat surface. They hide irregularities and imperfections of the main ceiling, and can also serve as an additional element of decoration with the possibility of built-in lighting. Moreover, stretch ceilings have a high degree of strength and durability.

When estimating the cost of wall and ceiling leveling, it is important to consider various factors. Leveling walls with plasterboard usually costs at least 13 GEL per square meter. The cost of leveling a ceiling, especially if stretch ceilings are used, is usually a little higher and ranges from 14 GEL per square meter. If only plastering is required, the cost can start from 11 GEL per square meter. In addition, it is important to consider the consumables, which can range from 12 Georgian Lari per square meter for drywall and 8 Georgian Lari per square meter for plastering.

In addition to choosing a method and estimating the cost, it is also necessary to consider the benefits of leveling walls and ceiling. A room with level surfaces looks more attractive and well-maintained, creating a comfortable atmosphere. Moreover, level surfaces make it easier to install furniture and other interior elements, as they can be securely attached without the problems associated with uneven walls and ceilings. Leveling can also help to improve the acoustic properties of the room and reduce noise levels.

It is important to note that the process of leveling walls and ceiling is a responsible task that requires certain skills and professional approach. Therefore, it is recommended to contact qualified professionals who have the experience and expertise to achieve the best results.

Floor screeding: methods and the importance of correct execution

When performing floor screeding, it is important to consider several factors. Floor screed is used to level the floor surface, as well as to provide sound and waterproofing. In addition, it can hide the elements of the floor heating and wiring running on the floor. Usually the thickness of the screed is up to 7 centimeters, if the floor surface is not too uneven or if there is no need to hide the heating elements of the floor heating.

One of the important aspects of floor screeding is to determine the cost of the work. Usually the cost is from 8 Georgian GEL per square meter of work. In addition, it is necessary to take into account the cost of consumables. For example, for a 4-7 centimeters thick screed, the cost of consumables can be 22 Georgian GEL per square meter.

Now let's look at some interesting aspects of floor screeding. Some craftsmen prefer to add special additives to the screed to increase its strength and stability. For example, a polymer-based additive can make the screed more resistant to various loads and impacts.

One important consideration when performing floor screeding is the proper use of tools and techniques. For example, when mixing the screed compound, it is important to ensure that the components are evenly distributed and lumps are avoided. It is also important to properly apply the screed to the floor, ensuring that the layer is evenly distributed over the entire surface.

In addition, when performing floor screeding, you can use different materials depending on the requirements and preferences. For example, for screeding you can use cement-sand mixture, polymer compositions or special self-leveling mixtures. Each material has its own features and advantages, and the choice depends on the specific situation and requirements for the floor.

It is important to note that floor screed is an important stage in the construction process. It provides not only an even and stable surface for subsequent finishing works, but also affects the comfort and safety of staying in the room. Properly executed floor screed can significantly improve the acoustic characteristics of the room, prevent the appearance of creaking and noise when walking.

Step #3. Finishing

At this stage of the finishing process, craftsmen lay tile, paint the walls, install flooring and finish the ceiling.

All about laying tiles

Prices for tile laying. The cost depends on various factors and can vary greatly. Prices start from 25 Georgian Lari per square meter for ceramic tiles and from 55 Georgian Lari per square meter for porcelain tiles.

But let's take a look not only at the cost, but also at the variety of tiles themselves. It can be picked from different price categories, and the choice ranges from more affordable options to exclusive, expensive collections. On average, tile prices range from 12 to 35 Georgian lari per square meter. However, there are also more expensive options, costing between 35 and 160 Georgian GEL per square meter. This can be a good option for those looking to create a luxurious and stylish interior.

Of course, laying tiles can be a significant part of the renovation costs. But there are ways to save money without sacrificing the look. For example, you can limit yourself to tiling only areas that are exposed to water, such as bathrooms and kitchens, and paint the rest of the surfaces with water-resistant paint. This will not only save you money, but will also add originality to your interior.

When starting to lay tiles, it is important to consider a number of important aspects. The first step is to choose the right adhesive and method of laying, depending on the type of tile and the surface on which it will be laid. It is important that the adhesive has not only strength but also a fast drying time, especially if you need to complete the renovation quickly.

The next step is to properly prepare the surface before laying the tiles. The surface should be clean, level and free of dust or dirt. This guarantees a strong and durable coating.

It is equally important to choose the right putty and grout for the joints. Putty will help to level the surface before laying tiles, and grout will give it a finished look and protect the joints from water and dirt.

Apart from the technical aspects, tile installation is also an art of design. You can create a unique and attractive laying pattern by using different sizes and colors of tiles. The play of light and shadow that can be achieved with different patterns will add depth and interest to your interior.

Don't forget the importance of proper maintenance of the tiles after installation as well. Regular cleaning and the use of the right products will help to maintain its attractive appearance for many years to come.

All about painting walls

When estimating the cost of a wall painting job, various factors are taken into account, including the complexity and size of the surface. The price for the job usually starts at 0.5 GEL per square meter for two coats of paint.

However, apart from the cost of the job, it is also important to consider the consumables needed to carry out the painting. Consumables such as brushes, rollers, trowel and protective film can add to the cost. Painting consumables usually cost from GEL 3 per square meter.

Painting walls is a process that requires attention to detail and certain skills. To ensure high quality work, it is important to properly prepare the surface before applying the paint. Irregularities and cracks may require additional filler and sanding to achieve a smooth surface.

The choice of paint color also plays an important role in interior design. Bright and saturated colors can add energy and character to a room, while neutral tones will create a calm and cozy atmosphere. It is recommended to choose high quality paints that offer durability and good colorfastness.

To add interest and liven up the walls, different painting techniques can be used. For example, the plaster technique creates a textural effect that adds depth and originality to the surface. You can also experiment with different shades of a single color or create harmonious combinations of several colors.

It is important to note that the painting process can take time and patience. The application of paint should be done evenly and carefully to avoid streaks and unevenness. Regular maintenance and proper care of painted surfaces will also help keep them looking attractive for years to come.

All about floor installation

The cost of installation work for floor installation represents an important aspect of the flooring process. When choosing the right tile material and considering your budget, you need to consider not only the cost of the tile itself, but also the cost of the installation work. In Georgia, prices for labor can vary depending on various factors such as the type of flooring, complexity of installation, and square footage of the room.

Floor installation rates can start from 25 Georgian GEL per square meter. This cost can vary depending on many factors including the type of floor and its features, such as the presence of topography or difficulty in surface preparation. The qualifications and experience of the workers can also affect the cost of the work. It is important to contact professionals who can assess the scope of work and provide accurate information about the cost of installation.

However, in addition to the cost of the work, you should also consider the cost of the tiles themselves. In the medium price category of tiles, prices can range from 12 to 32 Georgian Lari per square meter. In this category, you can find a variety of tile options, from simple and affordable, to more expensive and exclusive. It is important to consider your preferences and budget when choosing tiles.

When carrying out installation work, it is necessary to adhere to certain rules and recommendations. It is important to pay attention to surface preparation, floor leveling and proper tile laying. Accuracy and precision play an important role in creating a durable and high-quality floor.

In addition, it is possible to use different techniques and materials when selecting tiles and carrying out installation work. For example, you can use adhesive or grout to lay tiles. There are also different laying methods, such as straight laying, diagonal laying, or combinations. The choice of installation method can affect the visual appeal of the floor and create a unique design.

It is important to note that floor installation should be tailored to each room. Different rooms may require different approaches to installation. For example, in bathrooms or kitchens, consideration should be given to the moisture resistance of the materials and proper joint sealing to prevent moisture from penetrating under the tiles.

All about ceiling installation

The installation of the ceiling is an important stage in the renovation of the interior. One of the most attractive options for this task is the use of PVC stretch ceilings. This material has several advantages, making it an ideal choice for rooms with high humidity.

First of all, PVC stretch ceilings are highly moisture resistant. This means that they are not susceptible to warping or damage in high humidity environments. Rooms such as bathrooms, kitchens or swimming pools require special attention to the choice of materials, and PVC stretch ceilings are perfect for this task.

In addition, the installation of PVC stretch ceilings is a relatively simple and economical procedure. It does not require complex construction work and can be done quite quickly and without much hassle. Thanks to this, the repair time is shortened and you can enjoy your new ceiling as soon as possible.

The cost of PVC stretch ceiling installation work can vary depending on various factors such as room size, design and additional elements. However, as a rule, the cost is from 32 GEL per square meter, including materials and work.

It is important to note that the process of ceiling installation requires certain skills and professional approach. Therefore, it is recommended to contact experienced professionals to guarantee the quality and reliability of the installation. They will help you choose a suitable design, offer various finishing options and carry out the installation in compliance with all requirements and standards.

Additionally, to create a unique look for your ceiling, you can consider adding decorative elements such as lighting or textured inserts. This will allow you to give your interior a special sophistication and individuality.

Step #4. Installation of plumbing fixtures, furniture and mirrors

When it comes to bathroom remodeling, installing bathroom fixtures, furniture and mirrors is the final touch that adds the finishing touches and creates the perfect space for your privacy and relaxation. In this article, we will take a look at the cost of installing various elements in the bathroom and share some interesting ideas and new design trends.

• The toilet and bidet are also an integral part of the sanitary equipment in the bathroom. The cost of installing a toilet and bidet is approximately 48 Georgian GEL per square meter. When it comes to choosing a toilet bowl, you have the option to choose a classic model, the cost of which starts from 79 Georgian GEL. Also available are installations that offer convenience and functionality and can cost from 315 Georgian GEL.
• Bathtub installation is another important aspect of creating your spa sanctuary. The cost of installing a bathtub is approximately 95 Georgian GEL per square meter. The choice of bathtub should be based on your preferences and needs. You can opt for a classic bathtub or perhaps consider options with whirlpool or other additional features to create the perfect place to relax and rejuvenate.
• In addition, mirror-hanging is an essential part of the bathroom. The cost of mirror-hanging is approximately GEL 38 per piece. Mirrors not only reflect your image, but also visually expand the bathroom space, making it look more spacious and bright. You can choose a mirror that matches the style of your bathroom, be it classic, modern or minimalist.
• When it comes to furniture installation, the cost depends on the item you choose. Furniture installation can cost around GEL 15 per piece. Furniture in the bathroom not only adds functionality but also creates an aesthetically pleasing space. Choose furniture that suits your style and storage needs while providing ease of use.

Now that we have looked at the cost of installing various elements in the bathroom, let's turn our attention to some interesting ideas and new trends in bathroom design. Modern bathrooms are becoming more and more innovative and functional, offering a wide range of possibilities to create a unique and luxurious space.

One interesting idea is the use of LED lighting in the bathroom. LED strips or backlighting can create dramatic and mood lighting options, adding aesthetic appeal and a spa-like atmosphere to the bathroom.

Another popular trend is the use of natural and eco-friendly materials in bathroom design. Materials such as wood, stone and marble add a sense of natural beauty and elegance to the bathroom.

In addition, the bathroom can be transformed into a true oasis of relaxation with the installation of a whirlpool system. Whirlpool baths offer the opportunity to relax and de-stress after a long day. It is the perfect solution for those who want to add luxury and comfort to their bathroom.

Frequently Asked Questions

What information should be considered before starting a major renovation of the bathroom and toilet?

Before the repair, it is necessary to assess the condition of the plumbing system, choose quality materials, pay attention to functionality and ergonomics, and ensure good ventilation.

What materials are better to use when repairing the bathroom and toilet?

It is recommended to purchase ceramic tiles, sanitary ware and other materials from reliable manufacturers to ensure durability and aesthetic appearance.

Do all pipes need to be replaced when renovating a bathroom and toilet?

If leakage or corrosion problems are found, it is recommended to replace old pipes to prevent future problems.

How to ensure good ventilation in the bathroom and toilet?

It is recommended to install an efficient ventilation system to prevent mold and unpleasant odors.

How to plan the layout of bathroom and toilet fixtures and furniture?

It is important to think about the arrangement of bathroom fixtures, furniture and accessories to maximize comfort and usability.